AVer VC520 Pro3 - Image Quality Adjustments; White Balance and Frequency; Low Light and Resolution

29
WDR
(Wide Dynamic
Range)
Enable or disable to
improve image quality and
visibility in low light
environments.
[Notes] When WDR mode
is on, Flicker Decrease
function will be disabled.
 Off
 On
Flicker Decrease
on IFP / Monitor
Enable or disable to
decrease flickers when
focusing the camera on
digital monitors.
 Off
 On
Frequency
Select the frequency of the
daylight lamp.
 50 HZ

60 HZ
White Balance
Select the white balance
adjustment.
 Manual: Drag the slide bar below to adjust the
camera white balance value.
 AW B: Select to switch the white balance
adjustment to Auto White Balance.
 ATW : Select to switch the white balance
adjustment to Advance True Wide mode to
provide a full range color temperature
adjustment.
Noise Reduction
Select the level of
removing noise from
signals.
 Off
 Low
 Middle

High
Brightness
Select the camera
brightness level.
 Level 1~9
Sharpness
Select the camera
sharpness level.
 Off
 Low
 Middle

High
Saturation
Select the camera
saturation level.
 Level 1~9
Low Light
Compensation
Enable or disable auto
light adjustment.
 Off
 On
Low resolution
under 720p
(except
848*480)
Enable or disable low
resolution, and the system
will reboot automatically
(around 20~60 seconds).
 Disable
 Enable