AVer VC520 - Remote Controller Functions (Part 2)

5
Name
Function
3. FaceLumi
Press it to optimize and lock auto focus, auto exposure and skin
tone based on faces detected by camera at this moment. When
pan, tilt, zoom or camera disconnects, this settings are unlocked.
4. OSD menu
Press to bring out OSD menu.
5. Zoom in/Zoom out
Increase/Decrease the camera zoom.
6. Preset
 Press to get back to “home” position that user has set.
 Move camera to desired position. Press and hold the preset
button until saved message is displayed on screen. Select
preset position button 0~9 to save current camera position.
Press preset + preset position button (0~9), camera will go to
saved position.
7. Preset position
Press preset + preset position button (0~9), camera will go to
saved position.
8. Call/answer*
Answer a call or start a call.
9. Enter
To confirm selection in OSD menu.
10. Mute/Unmute Speakerphone
Mute/Unmute the speakerphone.
11. Volume up/down
Adjust volume up or down.
12. Far site camera control
Press the Far/Near button to control the far site camera for pan,
tilt, or zoom functions.
13. Hang up*
End the call.
* Function requires AVer PTZApp