4
Remote Controller
1 remote can control up to 3 AVer VC/CAM. Use AVer PTZapp
sets number associated with each camera, select which camera
you like to control on remote.
2. Camera direction control
Use the direction button on the remote to control the direction of
the camera. Press the direction button to move the camera or
press and hold for continuous pan or tilt.
Press it to optimize and lock auto focus, auto exposure and skin
tone based on faces detected by camera at this moment. When
pan, tilt, zoom or camera disconnects, this settings are unlocked.
Press to bring out OSD menu.
Increase/Decrease the camera zoom.
Press to get back to “home” position that user has set.
Move camera to desired position. Press and hold the preset
button until saved message is displayed on screen. Select
preset position button 0~9 to save current camera position.
Press preset + preset position button (0~9), camera will go to
saved position.
Press preset + preset position button (0~9), camera will go to
saved position.
Answer a call or start a call.
To Next Page
Loading...
Need help?
General
