Display Problems
The display panel is blank when the system is turned on -
n Make sure the computer is not in the Standby or
Hibernate suspend modes. The display is turned off to
conserve energy in these modes.
The screen is difficult to read -
n The display resolution should be set to 1280x800 for
optimal viewing.
1. Go to [Start > Settings > Control Panel] and double-click
the Display icon.
2. Under the Settings page, set screen resolution to
1280x800 and color depth to Highest (32-Bit).
The screen flickers -
n It is normal if the display flickers a few times during
shutting down or powering up.
To Next Page
Loading...
