01/11 Rev. 5.05-09 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
13
Specifications only for AP5.4/5.6 dispenser
• Speed, while the rewinding-Ø is calculated: 75mm/s (3“/s)
• Speed, while the material is fed back: 75mm/s (3“/s)
• Distance dispensing edge - print zero line: 25mm
• Distance punch sensor - print zero line: 71mm
• Max. admissible outer diameter of the rewound backing paper roll: 120mm
To Next Page
Loading...