01/11 Rev. 5.05-09 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
7
Label Stock
Material Types
Thermodirect material, thermotransfer material, synthetic ribbons: PE, PP,
PVC, PA in rolls or fan-folded.
Material Thickness
• Self-adhesive labels: 60- 160 g/m
2
• Cardboard labels:
– AP 5.4: max. 240 g/m
2
– AP 5.6: max. 190 g/m
2
Material Width
Label Length
Gap size
Gap size between the labels on the backing material:
• min.: 1.0mm
• max.: Label length-15 mm
Printer type Material width
AP5.4 15-120mm
AP5.4 dispenser 30-110mm
a
a) The material passage width is limited by the dispensing sen-
sor, which is mounted at the side. If a dispensing edge wit-
hout a sensor is applied (foot switch operation), the passage
width is as large as at the standard printer.
AP5.6 50-185mm
AP5.6 dispenser 50- 170 mm
a
[Tab. 5] Overview material width.
Printer Min. length Max. length
AP5.4 5mm max. print width
a
a) See Max. print length on page 4.
AP5.4 dispenser 30mm 200mm
AP5.4 dispenser
b
b) With optional label sensor for short labels.
5mm 200mm
AP5.6 5mm max. print width
a
AP5.6 dispenser 30mm 200mm
[Tab. 6] Overview label length.
To Next Page
Loading...