Avery Dennison AP 5.4 - Operational Limitations

01/11 Rev. 5.05-09 USER / SERVICE MANUAL Technical Data
AP5.4 – AP5.6
16
Limitations
Print width limitations at AP5.6
If the max. values given in the following tables are exceeded, malfunction of
the power supply will be most probably the consequence, followed by a restart
of the printer.
203dpi printhead
300dpi printhead
Print speed Limitations
mm/s Inch/s
51 2 Max. admissible print contrast: 120%
76/102 3/4
Max. admissible print contrast at
print width > 100mm: 110%
Max. admissible print width at
print contrast > 110%: 100mm
127/152 5/6
Max. admissible print contrast at
print width > 75mm: 85%
Max. admissible print width at
print contrast > 85%: 75mm
178/203 7/8
Max. admissible print contrast at
print width > 55mm: 67%
Max. admissible print width at
print contrast > 67%: 55mm
[Tab. 10] Print width limitations for AP 5.6 with 203dpi printheads.
Print speed Limitations
mm/s Inch/s
51/76 2/3 Max. admissible print contrast: 120%
102 4
Max. admissible print contrast at
print width > 100mm: 105%
Max. admissible print width at
print contrast > 105%: 100mm
127 5
Max. admissible print contrast at
print width > 75mm: 88%
Max. admissible print width at
print contrast > 88%: 75mm
152 6
Max. admissible print contrast at
print width > 65mm: 74%
Max. admissible print width at
print contrast > 74%: 65mm
[Tab. 11] Print width limitations for AP 5.6 with 300dpi printheads.