How to fix 'UnderLoad!' error on Avery Weigh-Tronix Controller?
If your Avery Weigh-Tronix Controller displays 'UnderLoad!', check the load cell connections. If you are using a 4-wire load cell cable, ensure that the sense jumpers are properly installed.
What to do if Avery Weigh-Tronix Controller shows 'WRONGCODE!'?
If your Avery Weigh-Tronix Controller displays 'WRONGCODE!', you need to enter the correct code to access the Setup Mode. Alternatively, you can press the [ENTER] key alone to view the selections without making any changes.
What does 'CHECK JUMPR' mean on my Avery Weigh-Tronix GSE 662 Controller?
The 'CHECK JUMPR' message on your Avery Weigh-Tronix Controller indicates that the installation of the jumper prohibits programming changes.
What does 'Tare>F.S.!' mean on my Avery Weigh-Tronix GSE 662 Controller?
If your Avery Weigh-Tronix Controller displays 'Tare>F.S.!', it is most likely that the entered tare value was incorrect.
What should I do if the displayed weight on my Avery Weigh-Tronix GSE 662 is incorrect?
If the displayed weight on your Avery Weigh-Tronix Controller is incorrect, power it down for a few seconds. If the indicator still does not work properly after powering it up, check the load cell or platform wiring.
General| Excitation Voltage | 10 VDC |
|---|---|
| Enclosure | NEMA 4X (IP66) |
| Communication | RS232 |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Load Cell Input | 4 x 350Ω |
Defines hazard signal words like DANGER, WARNING, CAUTION, and NOTE.
Covers power supply connection and circuit breaker requirements for safe operation.
Offers guidelines for wet environments, including NEMA 3R and IP56 ratings.
Step-by-step guide to enter a tare value on the Model 460.
How to enter a tare value on models other than Model 460.
How to enter the time and date for models excluding Model 460.
Details three methods for simple keypad sampling in Model 460.
Procedure for performing negative piece sampling on Model 460.
Lists and explains various error messages, their causes, and remedies.
Details error messages encountered in operational modes.
To Next Page
