BEFOREINSTALLINGTHEHOOD
Forthemostefficientairflowexhaust,useastraightrunorasfewelbowsaspossible.
VentunittotheOUTSIDEonly.
Atleasttwopeoplearerequiredforinstallation.
Removetherangehoodfromthecartonpackagingandplaceonaflatsurfaceforassembly.
CAUTION‐THISAPPLIANCESHOULDBEPROPERLYGROUNDED.
Thishoodhastwotypesofelectricalconnection:
Aconnectionwithelectricwires
3‐wirepoweroutlet,120V60Hz(suppliedbutnotinstalled).
Makesuretheunitisconnectedtoanindividual,properlygroundedcircuit.
If the electrical supply does not meet above requirements, call a
licensed electrician before
proceeding.
Routehousewiringascloseaspossibletotheinstalla tionlocation,intheceilingorbackwall.
Thehoodmustbeconnectedtothehousewiringinaccordancewiththelocalcodes andnorms.
WALLFRAMINGFORADEQUATESUPPORT
THIS VENT HOOD IS HEAVY.ADEQUATE STRUCTURE AND SUPPORT MUST BE PROVIDED IN ALL TYPES OF
INSTALLATION.IF MOUNTING ONTO DRY WALL, IT IS RECOMMENDED THAT THE HOOD BE SECURED TO
VERTICALSTUDSINTHEWALLORTOAHORIZONTALSUPPORT.
WARNING
BECAREFULWHENINSTALLINGTHEHOOD,ASITMAYHAVESHARPEDGES.WERECOMMENDTHATYOUWEAR
PROTECTIVEGLOVES.
CAUTION
DONOTREMOVETHEPROTECTIVEPLASTICFILMCOVERINGTHEHOODATTHISSTAGE.
23