Copyright & Terms of Use
December 2014
Copyright © 2014 by Aviat Networks, Inc.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any form or by any means, elec-
tronic, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Aviat Net-
works Inc. To request permission, contact techpubs@aviatnet.com.
Warranty
Aviat Networks makes no representation or warranties with respect to the contents hereof and specifically dis-
claims any implied warranties or merchantability or fitness for any particular purpose. Further, Aviat Net-
works reserves the right to revise this publication and to make changes from time to time in the content
hereof without obligation of Aviat Networks to notify any person of such revision or changes.
Safety Recommendations
The following safety recommendations must be considered to avoid injuries to persons and/or damage to the
equipment:
1. Installation and Service Personnel: Installation and service must be carried out by authorized personnel who
have the technical training and experience necessary to be aware of any hazardous operations during install-
ation and service, and of measures to avoid any danger to themselves, to any other personnel, and to the equip-
ment.
2. Access to the Equipment: Access to the equipment in use must be restricted to service personnel only.
3. Safety Norms: Recommended safety norms are detailed in the Health and Safety sections of this guide.
Local safety regulations must be used if mandatory. Safety instructions in this guide should be used in addi-
tion to the local safety regulations. In the case of conflict between safety instructions stated in this guide and
those indicated in local regulations, mandatory local norms will prevail. Should local regulations not be man-
datory, then the safety norms in this guide will prevail.
4. Service Personnel Skill: Service personnel must have received adequate technical training on tele-
communications and in particular on the equipment this guide refers to.
Trademarks
All trademarks are the property of their respective owners.
End User License Agreement and Open Source
By using this product you agree to the terms of the product End User License Agreement; to view this, log into
a CTR 8500, using the CLI command window and enter the CLI command “show EULA”.
This product uses free and open source software components, which can be viewed by using the CTR 8500,
CLI command “show system acknowledgments”. This command also details the licenses associated with
each component and describes the methods available to acquire the open source software.
To Next Page
Loading...
Need help?
General