HOW TO INFLATE CAR TIRE
4
Step 1
The vehicle is in the safe state of parking and
starts the engine.
Step 2
Plug the power cord into the cigarette lighter
socket of the vehicle or connect the clamps to
car battery(Red+/Black-).
Step 3
Press “R” button to select tire pressure
measurement units from PSI, KPA, BAR.
Press “+” or “-” button to preset tire pressure.
The preset tire pressure value can be read in the
display.
If using the battery clamps, Connect the cigarette
lighter head on the tire air compressor to the
converter of the battery clamp. Then connect the
clamps to car battery (Red+/Black-).
To Next Page
Loading...