HOW TO INFLATE CAR TIRE
Press the switch to start the light.
Step 5
The compressor will automatically stop inflating
once the preset pressure is reached.
NOTE:
The air compressor display may have an error value
( +/- 1 psi ) but always consistent. If happened, users
can set 1 psi higher or lower than the actual tire
pressure.
5
Connect the air hose to the tire valve stem.
(Connect extension coil air hose if needed)
Step 6
Press the "I" switch to start the inflation pump,
and when the preset air pressure value is reached,
the automatic shutdown will be performed.
Press the switch to "O" and turn off.
Step 4
To Next Page
Loading...