Chapter 6: Eleven Rack Studio Setup 69
Audio Connections
To connect Eleven Rack to your Pro Tools
interface using analog I/O:
1 Connect the Main outputs on Eleven Rack to
an open pair of analog line inputs on your audio
interface.
2 Hold the Edit/Back button on Eleven Rack to
enter Edit mode.
3 Choose the input you need for the current
task:
• If you want to re-amp pre-recorded signals
through Eleven Rack, choose Line L+R.
– or –
• If you want to record an analog signal us-
ing Eleven Rack’s input circuitry and Rig
processing, choose the Guitar, Mic, or Line
option, to match the input you’re using.
4 Connect the Line inputs on Eleven Rack to an
open pair of analog line outputs on your audio
interface.
Press Edit/Back twice to return to the main Rig
Select Screen.
To connect Eleven Rack to your Pro Tools
interface using AES/EBU or S/PDIF digital I/O:
1 Connect the Eleven Rack to an open pair of
digital inputs and outputs on your audio inter-
face, either AES/EBU or S/PDIF.
2 Hold the Edit/Back button on Eleven Rack to
enter User Options mode.
3 Select Rig Input, and press the SW1 button.
4 Choose the input you need for the current
task:
• If you want to re-amp pre-recorded signals
through Eleven Rack, choose Digital L+R.
• If you want to record an analog signal us-
ing the input circuitry and Rig processing
in Eleven Rack, choose the Guitar, Mic, or
Line option, to match the input you’re us-
ing.
5 Press Edit/Back to move back to the previous
screen.
6 Select Digital Clock/Input, and press SW1.
7 Set the Clock Source to External.
8 Set the Digital Input to AES/EBU or S/PDIF, to
match the type of connection you’re using.
9 Press Edit/Back to move back to the previous
screen.
10 Select Digital Output, and press SW1.
11 Choose Rig Outputs.
12 Press Edit/Back twice to return to the main
Rig Select Screen.
To Next Page
Loading...