HD OMNI Guide40
Insert
The Insert page of the I/O Setup lets you name
Hardware Inserts that you may have connected
to your Pro Tools audio interface. However,
with HD OMNI, any channels that are used for
monitoring are unavailable for hardware inserts.
Mic Preamps
The Mic Preamps page of the I/O Setup is used
for configuring hardware connections with a
PRE (if present).
H/W Insert Delays
The H/W Insert Delays page of the I/O Setup is
used for compensating for the delay (latency) of
any Hardware Inserts.
I/O Setup, Insert page
To Next Page
