Feature Symbol Description
Connection Status
LED
Provides information about the camera’s operation. See the
“Connecting the Camera to a Network Video Recorder” sec-
tion for more information on the Connection Status LED.
It can be turned off during operation for covert installations.
See the Avigilon Control Center software documentation for
details on how to turn off the camera’s LEDs.
Ethernet Port Provides connection to NVR for communication and image
data transmission. Provides power to camera when connected
to a network that provides Power over Ethernet.
The Ethernet Port has two status lights indicating link (left) and
activity (right).
Power Connector
Block
Provides power to camera where Power over Ethernet is not
available. Accepts a terminal block with either AC or DC power
connected. DC input can be either polarity.
I/O Terminals Provides connections to external input/output devices. See
the “Connecting to External Devices” section for more informa-
tion on the I/O Terminals.
Serial Number Tag Shows the camera’s serial and part numbers.
To Next Page
Loading...
