Pendant Mount Installation
Required Tools and Materials
The following tools are required to complete the installation but are not included in the package:
l Appropriate tool for cutting the cable access hole, if required
If you will be installing the NPT adapter (H5DH-DP-NPTA1), you will need:
l 1-1/2" NPT female to female adapter
l NPT pipe
Camera Package Contents
Ensure the surface mounted camera package contains the following:
l Avigilon H5 Dual Head Camera
l Mounting plate adapter
l Star-shaped screwdriver
l Rubber grommet
l RJ-45 grommet piercing cap
If you are using the optional NPT adapter (H5DH-DP-NPTA1), ensure the package contains the following:
l NPT adapter for the H5 Dual Head Camera
l Lock nut
l Thread seal tape
Installation Steps
Complete the following sections to install the device.
Mounting the Camera to a Pipe
If the camera needs to be installed to a pipe for a pendant installation, you use the NPT adapter (H5DH-DP-
NPTA1).
Note: This procedure requires a 1-1/2” NPT-female to NPT-female pipe adapter and conduit pipe
that are not supplied by Avigilon and should be sourced separately. It is recommended that the
NPT adapter be mounted to a 1-1/2” conduit pipe.
Pendant Mount Installation 26
To Next Page
Loading...
