1. Insert a microSD card into the camera. Do not force the microSD card into the camera or you may
damage the card and the camera.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the Avigilon IP Camera Web Interface User Guide.
Configuring the Camera
Once installed, use one of the following methods to configure the camera:
l
If you have installed multiple cameras, you can use the Camera Configuration Tool to configure
common settings. For more information, see the Camera Configuration Tool User Guide.
l
If the camera is connected to the Avigilon Control Center system, you can use the client software to
configure the camera. For more information, see the Avigilon Control Center Client User Guide.
l
If the camera is connected to a third-party network management system, you can configure the
camera's specialty features in the camera's web browser interface. For more information, see the
Avigilon IP Camera Web Interface User Guide.
Configuring the Camera 20
To Next Page
Loading...
