EasyManua.ls Logo

Avigilon 2.0C-H5A-PTZ-DP36 User Manual

Avigilon 2.0C-H5A-PTZ-DP36
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation Guide
Avigilon H5A-PTZ Camera Models:
2.0C-H5A-PTZ-DP36 2.0C-H5A-PTZ-DC36
4.0C-H5A-PTZ-DP36 4.0C-H5A-PTZ-DC36
8.0C-H5A-PTZ-DP36 8.0C-H5A-PTZ-DC36
Question and Answer IconNeed help?

Do you have a question about the Avigilon 2.0C-H5A-PTZ-DP36 and is the answer not in the manual?

Avigilon 2.0C-H5A-PTZ-DP36 Specifications

General IconGeneral
Camera TypePTZ
Lens36x Optical Zoom
Low Light Performance0.05 lux
AudioTwo-way audio
Sensor1/2.8" CMOS
PTZYes
Indoor/OutdoorOutdoor
Form FactorDome
Video CompressionH.264
Power SupplyPoE (Power over Ethernet)
Operating Temperature-40°C to 60°C

Summary

Important Safety Information

Safety Warnings and Precautions

Provides critical safety information regarding electrical hazards, warnings, and precautions for device operation and handling.

In-Ceiling Mount Installation

Cutting the Mounting Hole

Details the process of cutting a mounting hole in the surface for the in-ceiling camera installation.

Connecting Cables

Guides on connecting the necessary cables for proper operation of the in-ceiling PTZ camera.

Mounting the PTZ Dome Camera

Instructions on how to securely mount the PTZ dome camera into the prepared mounting hole.

Installing the Dome Cover

Details the procedure for attaching and securing the dome cover to the camera base after mounting.

Pendant Mount Installation

Preparing the Camera for Installation

Provides initial steps for preparing the pendant camera, including handling precautions and optional SD card insertion.

Installing the Mounting Adapter

Explains how to install the mounting adapter, specifically the pendant wall mount for vertical surfaces.

Installing the Pendant Wall Mount

Details the steps for installing the pendant wall mount, including cable routing and securing the mount.

Installing the NPT Mount

Guides on installing the NPT mount, including adapter, lock nut, and securing the camera to an NPT pipe.

Cable Connections

PoE Power Mode Switch

Describes the PoE power mode switch and its settings for legacy and IEEE 802.3bt PoE compatibility.

Connecting to Power and External Devices

Explains how to connect auxiliary power sources or PoE for the camera and lists precautions.

Connecting to the Camera

Setting the Home Preset Position

Connection Status LED Indicator

Troubleshooting Network Connections and LED Behavior

Resetting to Factory Default Settings

Setting the IP Address Using the ARP/Ping Method

Related product manuals