Name: Avigilon 2.0C-H5A-PTZ-DP36
Brand: Avigilon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Resetting to Factory Default Settings

If the device no longer functions as expected, you can choose to reset the device to its factory default

settings.

Use the firmware revert button to reset the device. The firmware revert button is shown in the following

diagram:

1. Ensure the camera is powered on.

2. Remove the dome cover.

3. Gently press and release the firmware revert button.

4. Re-install the dome cover.

Resetting to Factory Default Settings 37

Questions and Answers:

Need help?

Do you have a question about the Avigilon 2.0C-H5A-PTZ-DP36 and is the answer not in the manual?

Avigilon 2.0C-H5A-PTZ-DP36 Specifications

General