Top View
1. Lanyard anchor (Pendant camera only)
The safety lanyard attaches to the anchor to prevent the camera from falling during installation.
2.
Ethernet port
Accepts an Ethernet connection to a network. Server communication and image data transmission
occurs over this connection. Also receives power when it is connected to a network that provides
Power over Ethernet.
3.
I/O connector block
Provides connections to external input/output devices.
4.
Power connector block
Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity.
Only required when Power over Ethernet is not available.
5.
PoE power mode switch
Switch to select from the two PoE power mode options: legacy 60W PoE++ (A) or IEEE802.3bt
PoE++ (B). For more information, see PoE Power Mode Switch on pageî27.
Top View 4
To Next Page
Loading...
Need help?
General
