- 34 -
⚫ IP & Host Name : Input the IP Address ( ex: 122.116.123.138) or Host - web address
( ex: www.google.com) user would like to Ping.
User can use the “ ping test “ bottom to check the address valid or not
⚫ Failed times then action : Setup the ping failure times for 9858MT to execute the setup
ON/OFF / Reset action of setting .
⚫ Repeat : After the ON/OFF/Reset action , user can setup the Ping action to keep ping
( Continue ) or to Stop Ping ( Stop) .
⚫ Enable Ping function : In the selected Rules number , please select the outlet number power
to activate as ping fails and then press “ Apply Rule Action “ button to confirm the setting .
⚫ Ping failure action :
When the number of Ping Failures times have been reached. The device can be set to “ ON ,
OFF or Reset “ function
Reset: Can set up the time gap from OFF to ON. The “ Sec “ section is for action as Reset
only.
The setting times range is 1 to 999 sec.
Select the number of Ping Failures that user prefer to do before the action is activated.
EX: Result of setting
To Next Page