User’s Manual
Choice for barcode zone on a page:
Note:
Recommended resolution: 200~600 dpi for regular barcode,
300~600 dpi for QR code
Skewed barcodes may not be recognized correctly.
Using the same sheet repeatedly may decrease the
recognition accuracy due to accumulated dirt on the sheets.
If the sheet is not recognized correctly or gets smudged,
replace it with a new sheet.
Patch code Detection:
Check [Enable] to detect patch codes and notify the software
application for advanced processing.
A patch code is a pattern of parallel, alternating black bars and
spaces (i.e. a barcode) that is printed on a document. Patch code
sheet is most commonly used as a document separator in a
stack of document.
To Next Page
Loading...
