To Next Page

To Previous Page

4 ISDN and Internet with FRITZ!Card

M ISDN M ISDN

M ISDN

API API

API

SerSer

Ser

icic

f f

or CAPIor CAPI

or CAPI. This driver creates the

conditions under which telephony software based on TAPI

2.1 can be implemented with the ISDN-Controller FRITZ!Card.

The special advantage of the AVM system drivers is that the

entire range of CAPI functions continues to be supported. This

means that not only special ISDN applications like FRITZ!, but

also the system drivers can work simultaneously in send and

receive modes on both ISDN B channels.

For detailed information about the installation and im-

plementation of the AVM system drivers, see the help files

CAPIPT95NT.HLP, NDIS*-e.HLP and TAPI95NT.HLP in the \SOFT-

WARE folder on the CD.

How to Assign Multiple Subscriber Numbers

Incoming calls from ISDN are distinguished not only by their

multiple subscriber number, but also by their service indicator.

Multiple Subscriber Numbers for FRITZ! Modules

To receive telefaxes and data with FRITZ!, different multiple sub-

scriber numbers (MSNs) need not be assigned to these applica-

tions, as FRITZ!fax accepts only calls with the service indicator

“voice”, while FRITZ!data is responsible for calls with the “data”

service indicator.

FRITZ!fax, FRITZ!vox and FRITZ!fon, on the other hand, all use the

same service indicator (“voice analog”). For these modules to

be able to accept calls simultaneously and independently of

each other, FRITZ!fax and FRITZ!fon, as well as any telephone

which might be connected, must be assigned to accept calls to

different MSNs. Individual MSNs may be specified for each

module on the “ISDN” page of the module settings.

Multiple Subscriber Numbers for the CAPI Port Driver

Specific numbers for incoming and outgoing calls may also be

configured for the CAPI Port Driver. This offers such options as

recording on-line charges for an outgoing MSN. These MSNs are

set using AT commands. AT commands for the virtual modems

of the CAPI Port Driver are set as follows: Open “Start / Settings

Brand	AVM
Model	FRITZ!Card PCI
Category	PCI Card
Language	English

AVM FRITZ!Card PCI User Manual

Table of Contents

Other manuals for AVM FRITZ!Card PCI

Questions and Answers:

AVM FRITZ!Card PCI Specifications