Tally box: 327g
Tally lamp: 90g (without battery)
Working temperature: -20℃~60℃
storage temperature: -30℃~70℃
Tally box: 1×power supply (5V 1A) , 1×USB2.0
type-c cable, 1×antenna, 1×GPIO connector
Tally lamp: 1×USB2.0 type-c cable
4.DIP Functions
The dip switch of Tally box provides the following settings:
1.DIP SW 1-2
This switch is used to select the input interface.
when (SW1,SW2) is set to (1,1), GPIO input is selected.
when (SW1,SW2) is set to (1,0), USB-C input is selected.
To Next Page
Loading...