Avnet Ultra96-V2 - User Manual

Page 1
Copyright © 2019 Avnet, Inc. AVNET, “Reach Further,” and the AV logo are registered
trademarks of Avnet, Inc. All other brands are the property of their respective owners.
LIT# Ultra96-V2-HW-User-Guide-rev-1-0-V1
Ultra96-V2 Hardware User’s Guide
Revision 1
Version 1.0

Summary

Ultra96-V2 Architecture and Features

List of Key Ultra96-V2 Features

Summarizes the main hardware features and capabilities of the Ultra96-V2 board.

Ultra96-V2 Block Diagram

Functional Description

Zynq UltraScale+ MPSoC Processor System

Detailed description of the MPSoC processor, including its cores, memory, and peripherals.

Programmable Logic (PL) I;O Banks

Details the High-Density and High-Performance I/O banks available on the PL.

Processor System (PS) MIOs

Overview of the Processor System's Multiplexed Input/Output pins and their assignments.

PS Bank 503 System-Level Pins

PS Bank 504 LPDDR4 Memory Interface

PS Bank 505 Transceiver Pins

LPDDR4 Memory Module Specification

microSD Card Socket Functionality

USB Connectivity and Hub Details

Wi-Fi and Bluetooth Module

Expansion Connector Interfaces

Configuration and Debug

Boot Mode Selection via DIP Switch

How to configure the boot mode using the on-board DIP switch.

JTAG Connection for Debugging

Details the JTAG header for configuration and debugging the MPSoC.

Power Management

External Power Supply Requirements

Specifies the necessary voltage and connector type for the external power supply.

Power Regulator Configuration

Visualizes the multi-rail PMIC configuration and power rails.

Power-Up Sequencing

Illustrates the order of power rail activation during startup.

System Clocks

Reset Functionality

Avnet Ultra96-V2 Specifications

System Clocks

PS_CLK frequency	33.3 MHz
PS_CLK voltage	1.8 V
GTR_CLK0 frequency	26 MHz
GTR_CLK1 frequency	27 MHz