40 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
The following table shows the configuration of each predefined security profile.
To configure the security profile:
1. Select Application Settings - Security - Security Profile. The Security Profile screen appears.
2. Enable or disable the PC Card and USB Device Detection checkbox.
3. Under the Enabled Services section, enable or disable the RCP checkbox.
4. Under the Serial Devices heading, enable or disable the Port access is controlled by
authorizations assigned to user groups checkbox.
5. Select Custom, Moderate, Open or Secure from the Security Profile drop-down menu.
6. Click Save.
If you select the Custom security profile in step 5, you can configure custom security settings.
To configure custom security settings:
1. Select Application Settings - Security - Custom. The Custom screen appears.
2. Enable any of the following services: Telnet, FTP, SNMP, IPSec and ICMP.
3. Configure the SSH settings by selecting a version from the drop-down menu, enabling or
disabling the Allow root access checkbox, and entering the TCP port.
Table 4.2: Security Profile Services, SSH, and HTTP/HTTPS Definitions
Service or Other Security Parameter Secure Moderate Open
Telnet X
SSH v1 X X
SSH v2 X X X
Allow SSH root access X X
HTTP X X
HTTPS X X X
HTTPS - SSL v2 X X
HTTPS - SSL v3 (also enables TLSv1) X X X
HTTP redirection to HTTPS X
SNMP X
ICMP X X
FTP (None. Can be set only in custom.)
IPSec (None. Can be set only in custom.)
To Next Page
Loading...
