8 DSR1024 Switch Installer/User Guide
Getting Started
Before installing your DSR1024 switch, refer to the following lists to ensure you have all items that
shipped with the DSR1024 switch as well as other items necessary for proper installation.
Items supplied with the DSR1024 switch
The following items are shipped with the DSR1024 switch:
• Power transformer
• local country power cord
• Two ribbon cables with RJ-45 connectors at each end
• One RJ-45 to DB-9 (male) adaptor for the modem connection
• One RJ-45 to DB-9 (female) adaptor for the SETUP port
• One CAT 5 patch cable for connecting the DSRIQ
• One DSRIQ module (either PS/2 or USB, depending on configuration purchased)
• DSR1024 Installer/User Guide (this manual)
•DSR1024 Quick Installation Guide
Additional items needed
Additional items needed for installation of the DSR1024 switch include the following:
• (Optional) DSRIQ-VSN, DSRIQ-WSN, DSRIQ-USBS or DSRIQ-SRL supporting
serial
connections
• one CAT 5 patch cable for network connectivity (4-pair UTP, up to 10 meters)
• (Optional) DSView 3 software
• (Optional) V.34, V.90 or V.92-compatible modem and cables
• (Optional) SPC power control device
To Next Page
Loading...
