Avocent KVM over IP switch - Connecting External ResetPower Options

8/16 PS/2 KVM over IP switch
13
3.2.1 Connecting the External Reset/Power Option
Please refer to the manual of the PS/2 IP-KVM switch 8/16/32 port external power switch option or a
third party external power option to connect those external devices to one of the serial interface on the
rear side of PS/2 IP-KVM switch. By the date of printing this manual supported options are:
¾ . Avocent.SPC1 800/1600
¾ . Sentry In-Line Power Module
¾ . Leaning ePowerSwitch
¾ Peppercon IPM-220L