Avocent KVM over IP switch User Manual

8/16 PS/2 KVM over IP switch
50
Figure 6-24. SSL Certificate Upload
After completing these three steps, the PS/2 IP-KVM switch has its own certificate that is
used for identifying the card to its clients.
Warning
If you destroy the CSR on the PS/2 IP-KVM switch there is no way to get it back! In
case you deleted it by mistake, you have to repeat the three steps as described
above.
Common name
This is the network name of the PS/2 IP-KVM switch once it is installed in the user's
network (usually the fully qualified domain name). It is identical to the name that is used
to access the PS/2 IP-KVM switch with a web browser (without the “http://” prefix). In
case the name given here and the actual network name differ, the browser will pop up a
security warning when the PS/2 IP-KVM switch is accessed using HTTPS.
Organizational unit
This field is used for specifying to which department within an organization the PS/2
IP-KVM switch belongs.
Organization
The name of the organization to which the PS/2 IP-KVM switch belongs.
Locality/City
The city where the organization is located.

Avocent KVM over IP switch Specifications

General

Brand	Avocent
Model	KVM over IP switch
Category	Switch
Language	English