What to do if my AVOCOR Monitor remote control does not work?
If your AVOCOR Monitor's remote control isn't working, the batteries might be dead. Try replacing them. It's also possible the buttons are locked. Unlock them by pressing OK, OK, EXIT, EXIT, OK and EXIT, in sequence.
Why does my AVOCOR Monitor display not turn on?
If your AVOCOR Monitor isn't turning on, it could be due to a few reasons. First, ensure that the monitor is properly plugged into an active AC outlet. Also, check if the main power switch is in the off position and set it to the on position.
What to do if there is no picture on my AVOCOR Monitor?
If your AVOCOR Monitor is on but showing no picture, the issue might be with the source. Ensure the source component is turned on and properly connected to the display. Also, verify that you've selected the correct source on your monitor.
How to fix too dark image on AVOCOR Monitor?
If the image on your AVOCOR Monitor is too dark, the brightness and/or backlight settings may be too low. Increase the brightness and/or backlight settings to brighten the image.
Why images from an HDMI source do not display on my AVOCOR Monitor?
If images from an HDMI source are not displaying on your AVOCOR Monitor, the HDMI cable from the source to the display might be defective or too long. Try using a known-good or shorter HDMI cable.
Why is the image jittery on my AVOCOR Monitor?
If the image on your AVOCOR Monitor is jittery or unstable, it could be due to a poor-quality or improperly connected source. Ensure the source is properly connected and of adequate quality for detection. Also, the horizontal or vertical scan frequency of the input signal may be out of range for the display; correct this at the source.
How to fix washed out image on AVOCOR Monitor?
If the image on your AVOCOR Monitor appears washed out, it could be that the brightness is set too high. Try decreasing the brightness setting. Alternatively, the contrast might be set too high, so also try decreasing the contrast setting.
What to do if image geometry is incorrect on AVOCOR Monitor?
If the image geometry is incorrect on your AVOCOR Monitor, the aspect ratio selection may be incorrect. Try selecting a different aspect ratio.
What to do if computer images do not display correctly on AVOCOR Monitor?
If computer images are not displaying correctly on your AVOCOR Monitor, the resolution and frequency of the video card in the computer might not be compatible with the display. Select a compatible resolution and vertical frequency.
General| Screen Size | 75 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m² |
| Viewing Angle | 178° |
| Response Time | 8 ms |
| Touch Technology | Infrared |
| Operating System | Android 8.0 |
| Storage | 32 GB |
| Display Technology | LCD |
| Contrast Ratio | 1200:1 (Typical) |
| Processor | Quad-core |
| Ports | HDMI, USB |
| Touch Points | 20-point multi-touch |
To Next Page
