Avol ALT2690FD - Customizing the CHANNEL Settings

Application
Customizing the CHANNEL Settings
If you select “Cable” as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use button to highlight the “Start to Scan”, then press button
to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
Use and button to highlight the desired item, then press OK
button to add or remove the highlighted channel as favorite.
Use and button to highlight the desired item, then press OK
button to show or hide the highlighted channel.
Favorite Allows you to add these channels which you desired as the favorite channels.
Use or button to highlight the “Favorite” item, then press button
to enter into the following menu.
Show / Hide Allows you to show or hide the channels.
Channel Label Allows you to setup a label for the channel.
Press and button to select the position of the table, and press and
button to select the words.
TV Sound System Select the TV sound system.
Setup
Lock
12
6
Time
Picture Audio
Channel
Move Press “OK” change Move
MENU
No Program Name Favorite
No Program Name Favorite
ATSC 1
ATSC 2
ATSC 3
KOCE HD
KOCE SD
KOCE LB
20
14 1
14 2
14 3
50 1
50 2
66 0
50 3
Use or button to highlight the “Show / Hide” item, then press
button to enter into the following menu.
Setup
Lock
12
6
Time Picture Audio Channel
No Program Name Show
No Program Name Show
ATSC 1
ATSC 2
ATSC 3
KOCE HD
KOCE SD
KOCE LB
20
14 1
14 2
14 3
50 1
50 2
50 3
66 0
Move Press “OK” change Move
MENU
29