EasyManua.ls Logo

Avtex L249DRS-PRO - Safety Information; Instruction

Avtex L249DRS-PRO
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction
This equipment has been designed and manufactured to
meet international safety standards but, like any electrical
equipment, care must be taken if you are to obtain the best
results and safety is to be assured.
DO read the operating instructions before you attempt to
use the equipment.
DO ensure that all electrical connections (including the
mains plug, extension leads and interconnections between
the pieces of equipment) are properly made and in
accordance with the manufacturers instructions. Switch off
and withdraw the mains plug before making or changing
connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO route the mains lead so that it is not likely to be walked
on, crushed, chafed, or subject to excessive wear and tear or
heat.
DONT remove any fixed cover as this may expose
dangerous voltages.
DONT obstruct the ventilation openings of the equipment
with items such as newspaper, tablecloths, curtains, etc.
Overheating will cause damage and shorten the life of the
equipment.
DONT allow electrical equipment to be exposed to dripping
or splashing, or objects filled with liquids.
DONT place hot object or naked fame sources such as
lighted candles or night-lights on, or close to equipment.
High temperatures can melt plastic and lead to fires.
DONT use makeshift stands and NEVER fix legs with wood
screws-to ensure complete safety always fit the
manufacturers approved stand or legs with the fixings
provided according to the instructions.
DONT use equipment so that you are distracted from the
requirements of traffic safety.
DONT listen to headphones at high volume, as such use can
permanently damage your hearing.
DONT leave equipment switched on when it is unattended
unless it is specifically stated that it is designed for unattended
operation or has a stand-by mode. Switch off by unplugging
the equipment and make sure that your family know how to
do this. Special arrangements may need to be made for infirm
or handi-capped people.
DONT continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any
way-switch off, withdraw the mains plug and consult your
dealer.
ABOVE ALL,
- NEVER let anyone especially children push anything into
holes, slots or any other opening in the equipment - this
could result in a fatal electrical shock;
- NEVER guess or take chances with electrical equipment of
any kind. It is better to be safe than sorry!
5

Related product manuals