VGA SETUP
21
OSD SETUP
Press [ ] button to select " " and press [ /OK] button to enter.
Item
Description
LANGUAGE
OSD H-POSITION
TRANSPARENCY
Select OSD language.
To adjust OSD horizontal position.
Transparency of OSD.
Press [ ] button to select different items and press [ ] button to adjust .
NOTE
VGA
NO SIGNAL
1:50
If you use this unit as a PC-monitor:
If no signal input , his unit will go into sleep mode .
In this mode, the indicator will turn red, and the screen is turned off.
You can wake it up by waking up your PC .
If the unit hasn t been connected with VGA line to external
equipment, the NOT CONNECT menu will automatically display
on the screen; and if the input signal is beyond the support scope,
the UNSUPPORTED menu will automatically display on the screen.
At these two occasion, after 5 minutes, the unit will enter real
standby mode(you must use Power button or Power key to power it).
after 5 minutes, t
'
SELECT RETURN
SETUP
ENTER
OSD SETUP
LANGUAGE
ENGLISH
OSD H-POSITION
OSD V-POSITION
OSD DURATION
TRANSPARENCY
OK
50
50
25
25
OSD V-POSITION
To adjust OSD vertical position.
To Next Page
Loading...
