OTHER FEATURES
E-13
CLOCK SETTING
1. Press the “STANDBY” button to switch unit at standby mode.
2. Press the “MEMORY” button twice to entry clock set mode.
3. Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “MEMORY” button to confirm.
4. Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “MEMORY” button to confirm.
Notes:
Because clock setting is at standby mode, the display is dim.
SLEEP
1. Press the “SLEEP” button on remote control, display will show “90”. That means, after 90
minutes, appliance will automatically turn to standby mode.
2. Press the “SLEEP” button again to select the automatically turn off time, from 90, 80, 70, 60, 50,
40, 30, 20, 10 minutes.
3. Press the “SLEEP” button to “OFF” to canel sleep function.
To Next Page
Loading...
