OTHER FEATURES
E-14
TIMER S
ETTING
Timer setting must be after completed clock setting.
1. Press the “STANDBY” button to turn the unit at standby mode.
2. Press the “TIMER/ALARM” button on remote control or unit to timer on mode.
Display:
3. Press the “CLOCK” button once.
Dispaly:
4. Press the “MEMORY” button once, then press “SKIP+” or “SKIP-” button to adjust hour(1-24).
5. Press the “MEMORY” button again, then press “SKIP+” or “SKIP-” button to adjust minutes.
6. Press the “MEMORY” button once, to save time.
7. Unit will automatically turn on at the preset time.
Display:
9. Repeat step 4-6 to set the timer.
10. Unit will automatically turn off at the preset time.
11. To cancel timer setting, turn on the unit and pressthe ”TIMER/ALARM” on remote control to timer
off mode.
TIMER
ON TIME
OFF TIME
8. Press the “CLOCK” button twice.
To Next Page
Loading...
