awave DSP 6V3 - 8 Stand Installation Reference; Channel Stand Alone Treble Mode

PRODUCT BRIEF INTRODUCTION
[ 15 ]
PRODUCT BRIEF INTRODUCTION
[ 16 ]
12. WRITE.
To Write To Device(POS1-POS8).
14. X-OVER AND EQ CHARTS.
15. EQ SETTING.
8.STAND INSTALLATION REFERENCE
1.Red lines and slopes will change accordingly when
2.EQ all frequency points can be move left or right.For 20Hz-20KHz can be any Regulation.
Q volue=1-12.
HP/LP of crossover and EQ are modified.
8.1 6 CHANNEL STAND ALONE TREBLE MODE
Ground
11. Filter Model.
To choose different Filter type Linkwitz Bessel Butterworth.
13. READ.
To Read From Device(POS1-POS8).
Subwoofer/CH7+CH8 To Subwoofer