Awenta CM - MAINTENANCE AND CLEANING; Servicing and maintenance guidelines; Cleaning instructions; WARRANTY TERMS & CONDITIONS

• During all maintenance and servicing works the electrical and OHS regulations (PN-IEC 60364-3) must be
observed.
•
Before servicing the fan, isolate it from the mains voltage with the circuit breaker. Secure the circuit breaker
against inadvertent operation!
•
The fan ductwork must be clear of foreign bodies: hazard of injury by objects blown out at a high speed!
•
Do not attempt any maintenance when the fan is running or at live voltage!
•
If excessive vibrations are felt or heard, have the technical inspection carried out by a qualied electrician.
•
The maintenance intervals depend on the actual contamination of the fan rotor and must not be longer than 6
months!
•
Check the fan rotor for cracks.
•
The manufacturer shall not be liable for any damage resulting from unprofessional repairs.
•
For equipment where engines with ball bearings have been used with “lifetime lubrication”, the engine does
not require lubrication.
Cleaning
Electrocution hazard by damaged wiring insulation!
Before attempting to clean the fan, isolate it from the mains voltage with the circuit
breaker. Secure the circuit breaker against inadvertent operation!
•
Clean the the visible parts of the housing with a damp cloth.
•
Do not use aggressive paint solvents!
•
Do not clean with a high pressure cleaner or strong jets of water!
•
Clean carefully to prevent water from entering the motor or the terminal box.
•
Always keep the grille at the inlet of the fan ducts clean.
WARRANTY TERMS & CONDITIONS
1. The warranty period for the proper operation of the fan is 2 years, from the date of sale.
2.
The warranty rights and obligations will be void and null without demonstrating a proof of purchase
(a receipt or an invoice).
3. The warranty covers all defects and damage attributable to the manufacturer.
4. Have your product delivered for warranty servicing to the manufacturer or the original seller.
5. The manufacturer undertakes to repair the product or replace it with a new counterpart within 14 days from
ling your warranty complaint.
6.
The warranty does not cover any of the following: damage to the product attributable to improper or
unqualied installation, operation against the intended use, improper transport, storage and/or
maintenance, any faults attributable to unauthorized repairs, or any accidental damage.
7. The warranty does not cover the installation or the maintenance of the product.
8.
For all matters not provided for by this Warranty Certicate, the Polish Civil Code (Articles 577- 582) shall
apply.
Do not dispose of waste electrical equipment with household waste.
The crossed-out wheelie bin symbol on this product means that it is waste of electrical and electronic
equipment (WEEE) at the end of its operating life and shall not be disposed with household
waste. The crossed-out wheelie bin symbol species that the product is subject to obligatory
waste segregation schedules for proper disposal. The product is made from recyclable
materials and components. The product user is required to return the product which has
become WEEE to a WEEE collection unit. The operators of WEEE collection units, including
local WEEE locations, product resellers and other WEEE collection locations managed by local
authorities form a proper waste disposal system. Proper WEEE disposal helps avoid harmful
eects to humans and the environment from the risk caused by hazardous components this product may
contain. The household plays an important role in contributing to reuse and recovery, including recycling, of
used up appliances, and it is the stage where attitudes are created that impact the preservation of the
common being the clean natural environment.
EN
11