Awesomatix A800MMX User Manual

A800MMX
1/10-SCALE TOURING CAR
INSTRUCTION MANUAL

Awesomatix A800MMX Specifications

General

Brand	Awesomatix
Model	A800MMX
Category	Motorized Toy Car
Language	English

Summary

Introduction and Safety

Before You Start

Important information before beginning assembly, including safety and return policy.

General Precautions

Essential safety precautions for building and operating the RC car.

Step 1: Front and Rear Assembly

Step 2: Front Universal Assembly

Step 3: Rear Universal Assembly

Step 4 & 5: Wheel Hexes and Suspension Arms

Assembling the Dampers

Step 6: Damper Assembly

Step 6 Continued

Continuation of Step 6, focusing on damper orientation and securement.

Step 7 & 8: Chassis and Motor Mount Assembly

Step 8 Assembly

Instructions for installing ball studs and the motor mount in Step 8.

Differential Assembly Steps 9-12

Step 9: Pulley and Bearing Assembly

Assembly of pulley and bearing components for the differential.

Step 10: Gear Case Assembly

Assembly of differential gears and case in Step 10.

Step 11: Differential Oil Filling

Instructions for filling the differential with silicone oil and assembly.

Step 12: Final Differential Assembly

Step 13 & 14: Spool and Bearing Housing Assembly

Step 14 Assembly

Steps 15-17: Shock Holders and Drive Belts

Step 15: Shock Holder Assembly

Step 16: Fan Holder and Pulleys

Step 17: Drive Belt Installation

Steps 18-19: Steering and Shock Holder Assembly

Step 18: Bellcrank Assembly

Steps 20-22: Top Decks and Arm Clips

Step 20: Top Deck Assembly

Step 21: Ball Studs and Spacers

Steps 23-24: Shock Rods and Sway Bar Holders

Step 24 Assembly

Step 25: Sway Bar System Assembly

Step 25 Continued

Step 26: Servo Rods and Upper Arms

Step 27: Battery Holder and Weight Adjustment

Step 28: Servo and Linkage Setup

Steps 29-31: Bumpers, Gears, and Final Assembly

Step 29: Bumper and Body Post Assembly

Step 30: Gear and Motor Installation

Step 31: Final Assembly

Suspension Setup Techniques

Camber and Caster Adjustment Rules

Guidelines for adjusting camber and caster angles simultaneously.

Caster Measurement and Roll Center Adjustment

Methods for measuring caster and adjusting roll center using spacers.

Wheelbase Adjustment Method

Procedure for adjusting wheelbase by altering rear suspension caster.

Shock Setting Techniques

Damping and Spring Rate Setting

How to adjust damping and spring rates by changing A-distance.

Spring Preload Setting

How to adjust spring preload and ride height using RHS screw.

Suspension Stiffness Graphs

Suspension Stiffness for SPR01 Springs

Graph illustrating suspension stiffness for SPR01 springs.

Suspension Stiffness for SPR01S Soft Springs

Graph illustrating suspension stiffness for SPR01S soft springs.

Setup Sheet Guide

Track and Shocks Configuration

Chassis, Weight, and Tire Settings

Suspension Geometry Settings (Front & Rear)