AWS Storage Gateway - Page 130

AWS Storage Gateway User Guide
Using Your Tape Gateway
2. Choose Configure Storage Devices to open the Device Configuration wizard.
3. Choose Next. The NetBackup application detects your computer as a device host.
4. In the Device Hosts column, select your computer, and then choose Next. The NetBackup
application scans your computer for devices and discovers all devices.
5. In the Scanning Hosts page, choose Next, and then choose Next. The NetBackup application finds
all 10 tape drives and the medium changer on your computer.
6. In the Backup Devices window, choose Next.
7. In the Drag and Drop Configuration window, verify that your medium changer is selected, and then
choose Next.
8. In the dialog box that appears, choose Yes to save the configuration on your computer. The
NetBackup application updates the device configuration.
9. When the update is completed, choose Next to make the devices available to the NetBackup
application.
10. In the Finished! window, choose Finish.
To verify your devices in the NetBackup application
1. In the NetBackup Administration Console, expand the Media and Device Management node, and
then expand the Devices node. Choose Drives to display all the tape drives.
API Version 2013-06-30
123