AWS Storage Gateway User Guide
Using Your Tape Gateway
1. Start the NetBackup Administration Console.
2. Expand the Media node, open the context (right-click) menu for Volume Pool, and then choose
New. The New Volume Pool dialog box appears.
3. For Name, type a name for your volume pool.
4. For Description, type a description for the volume pool, and then choose OK. The volume pool you
just created is added to the volume pool list.
The following screenshot shows a list of volume pools.
To add virtual tapes to a volume pool
1. Expand the Robots node, and select the TLD(0) robot to display the virtual tapes this robot is aware
of.
If you have previously connected a robot, your tape gateway robot might have a different name.
2. From the list of virtual tapes, open the context (right-click) menu for the tape you want to add
to the volume pool, and choose Change to open the Change Volumes dialog box. The following
screenshot shows the Change Volumes dialog box.
API Version 2013-06-30
126
To Next Page
Loading...