AWS Storage Gateway User Guide
Using Your Tape Gateway
To archive a virtual tape
1. In the NetBackup Administration console, expand the Media and Device Management node, and
expand the Media node.
2. Expand Robots and choose TLD(0).
3. Open the context (right-click) menu for the virtual tape you want to archive, and choose Eject
Volume From Robot.
4. In the Eject Volumes window, make sure the Media ID matches the virtual tape you want to eject,
and then choose Eject.
5. In the dialog box, choose Yes. The dialog box is shown following.
API Version 2013-06-30
131
To Next Page
Loading...