AWS Storage Gateway User Guide
Performing Tasks on the EC2 Local Console (File Gateway)
To run a configuration or diagnostic command
1. Log in to your gateway's local console. For instructions, see Logging In to Your Amazon EC2 Gateway
Local Console (p. 244).
2. In the AWS Appliance Activation Configuration main menu, enter 5 for Gateway Console.
3. In the command prompt, enter h, and then press the Return key.
The console displays the AVAILABLE COMMANDS menu with the available commands. After the
menu, a gateway console prompt appears, as shown in the following screenshot.
4. At the command prompt, enter the command that you want to use and follow the instructions.
To learn about a command, enter the command name at the command prompt.
API Version 2013-06-30
251
To Next Page
Loading...