AWS Storage Gateway - Page 267

AWS Storage Gateway User Guide
Performing Tasks on the VM Local
Console (Volume and Tape Gateways)
To Do This
Reset all your gateway's network
configuration to DHCP
Type option 4.
All network interfaces are set to use DHCP.
Important
If your gateway has already been
activated, you must shut down and
restart your gateway from the AWS
Storage Gateway console for the settings
to take effect. For more information,
see Shutting Down Your Gateway
VM (p. 219).
Set your gateway's default route adapter Type option 5.
The available adapters for your gateway are
shown, and you are prompted to select one of the
adapters—for example, eth0.
View your gateway's DNS configuration Type option 6.
The IP addresses of the primary and secondary
DNS name servers are displayed.
View routing tables Type option 7.
The default route of your gateway is displayed.
Testing Your Gateway Connection to the Internet
You can use your gateway's local console to test your Internet connection. This test can be useful when
you are troubleshooting network issues with your gateway.
To test your gateway's connection to the Internet
1. Log in to your gateway's local console.
• VMware ESXi—for more information, see Accessing the Gateway Local Console with VMware
ESXi (p. 273).
• Microsoft Hyper-V—for more information, see Access the Gateway Local Console with Microsoft
Hyper-V (p. 274).
API Version 2013-06-30
260