AWS Storage Gateway - Page 277

AWS Storage Gateway User Guide
Performing Tasks on the EC2 Local
Console (Volume and Tape Gateways)
The console displays the available regions.
3. Select the region you want to test. For example, us-east-2. For supported AWS Regions and a list of
AWS service endpoints you can use with Storage Gateway, see Regions and Endpoints in the AWS
General Reference.
Each endpoint in the region you select displays either a [PASSED] or [FAILED] message, as shown
following.
Message Description
[PASSED] AWS Storage Gateway has Internet connectivity.
[FAILED] AWS Storage Gateway does not have Internet
connectivity.
Running Storage Gateway Commands on the Local Console
The AWS Storage Gateway console helps provide a secure environment for configuring and diagnosing
issues with your gateway. Using the console commands, you can perform maintenance tasks such as
saving routing tables or connecting to AWS Support.
To run a configuration or diagnostic command
1. Log in to your gateway's local console. For instructions, see Logging In to Your Amazon EC2 Gateway
Local Console (p. 267).
2. In the AWS Storage Gateway Configuration main menu, type 3 for Gateway Console.
3. In the Storage Gateway console, type h, and then press the Return key.
API Version 2013-06-30
270