AWS Storage Gateway User Guide
Connecting to Your Volumes to a Windows Client
To connect your Windows client to a storage volume
1. On the Start menu of your Windows client computer, type iscsicpl.exe in the Search Programs
and files box, locate the iSCSI initiator program, and then run it.
Note
You must have administrator rights on the client computer to run the iSCSI initiator.
2. If prompted, choose Yes to start the Microsoft iSCSI initiator service.
3. In the iSCSI Initiator Properties dialog box, choose the Discovery tab, and then choose the
Discovery Portal button.
4. In the Discover Target Portal dialog box, type the IP address of your iSCSI target for IP address or
DNS name, and then choose OK. To get the IP address of your gateway, check the Gateway tab on
the AWS Storage Gateway console. If you deployed your gateway on an Amazon EC2 instance, you
can find the public IP or DNS address in the Description tab on the Amazon EC2 console.
API Version 2013-06-30
366
To Next Page
Loading...