AWS Storage Gateway User Guide
Connecting to VTL Devices
6. Select the first device and choose Connect. You connect the devices one at a time.
7. In the Connect to Target dialog box, choose OK.
8. Repeat steps 6 and 7 for each of the devices to connect all of them, and then choose OK in the iSCSI
Initiator Properties dialog box.
On a Windows client, the driver provider for the tape drive must be Microsoft. Use the following
procedure to verify the driver provider, and update the driver and provider if necessary.
To verify the driver provider and if necessary update the provider and driver on a Windows
client
1. On your Windows client, start Device Manager.
2. Expand Tape drives, choose the context (right-click) menu for a tape drive, and choose Properties.
3. In the Driver tab of the Device Properties dialog box, verify Driver Provider is Microsoft.
API Version 2013-06-30
370
To Next Page
Loading...