AWS Storage Gateway - Page 382

AWS Storage Gateway User Guide
Customizing iSCSI Settings
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-
BFC1-08002BE10318}
c. Find the subkey for the Microsoft iSCSI initiator, shown following as [<Instance Number].
The key is represented by a four-digit number, such as 0000.
HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-
BFC1-08002BE10318}\[<Instance Number]
Depending on what is installed on your computer, the Microsoft iSCSI initiator might not be the
subkey 0000. You can ensure that you have selected the correct subkey by verifying that the
string DriverDesc has the value Microsoft iSCSI Initiator, as shown in the following
example.
d. To show the iSCSI settings, choose the Parameters subkey.
e. Open the context (right-click) menu for the MaxRequestHoldTime DWORD (32-bit) value,
choose Modify, and then change the value to 600.
This value represents a hold time of 600 seconds. The example following shows the
MaxRequestHoldTime DWORD value with a value of 600.
2. Increase the disk timeout value, as shown following:
a. Start Registry Editor (Regedit.exe), if you haven't already.
API Version 2013-06-30
375