AWS Storage Gateway User Guide
Earlier Updates
Change Description Date Changed
New Region
Support for storage
up to 512 TiB in size
for stored volumes
Other gateway
updates and
enhancements to
the AWS Storage
Gateway local
console
Tape gateway is now available in the Asia Pacific (Seoul)
Region. For more information, see AWS Regions (p. 10).
For stored volumes, you can now create up to 32 storage
volumes up to 16 TiB in size each, for a maximum of
512 TiB of storage. For more information, see Stored
Volumes Architecture (p. 5) and AWS Storage Gateway
Limits (p. 395).
Total size of all tapes in a virtual tape library is increased
to 1 PiB. For more information, see AWS Storage Gateway
Limits (p. 395).
You can now set the password for your VM local console
on the AWS Storage Gateway Console. For information,
see Setting the Local Console Password from the Storage
Gateway Console (p. 253)..
March 21, 2016
Compatibility
with for Dell EMC
NetWorker 8.x
Tape gateway is now compatible with Dell EMC
NetWorker 8.x. You can now use Dell EMC NetWorker to
back up your data to Amazon S3 and archive directly to
offline storage (GLACIER or DEEP_ARCHIVE). For more
information, see Testing Your Setup by Using Dell EMC
NetWorker (p. 95).
February 29, 2016
Support for VMware
ESXi Hypervisor
version 6.0 and Red
Hat Enterprise Linux
7 iSCSI initiator
Content restructure
AWS Storage Gateway now supports the VMware ESXi
Hypervisor version 6.0 and the Red Hat Enterprise
Linux 7 iSCSI initiator. For more information, see
Supported Hypervisors and Host Requirements (p. 20)
and Supported iSCSI Initiators (p. 22).
This release includes this improvement: The
documentation now includes a Managing Your Activated
Gateway section that combines management tasks
that are common to all gateway solutions. Following,
you can find instructions on how you can manage your
gateway after you have deployed and activated it. For
more information, see Managing Your Gateway (p. 144).
October 20, 2015
API Version 2013-06-30
425
To Next Page
Loading...