Be sure to turn off the video camera before a card is inserted or taken out.
2. Power on/off
Power on: Press and hold Power key
for about 2 seconds and release it, accompanied by a sound of the
buzzer, the LCD screen will be started (video recording mode is started by default), and the working indicator in
red/Busy indicator will be normally on.
Power saving mode: The device will enter power saving mode when it is in an idle state for one minute (default
setting of the system) without any operation, LCD display will be turned off automatically. And it can be
activated by pressing any key after it is turned off.
Power off: Press and hold Power key
for about 3 seconds and release it, accompanied by a sound of the
buzzer, the LCD screen will be shut down.
The device will be turned off automatically when it is in power saving mode for 3 minutes (default setting of the
system) without any operation, “Goodbye” will be displayed on the LCD screen when it is turned off.
To Next Page
Loading...
