1. Press the DEVICE button of the device of which to display the code.
2. Simultaneously press and hold the SET button and 1 release the two buttons. The LED under the cor-
responding device button lights up; its fl ashing indicates the fi rst digit of the code.
3. To display the second digit, press and hold the SET button and 2 simultaneously. The LED under the
corresponding device starts fl ashing. Its fl ashing indicates the second digit of the code.
4. To display the third digit, press and hold the SET and 3 simultaneously. The LED under the corresponding
device starts fl ashing. Its fl ashing indicates the third digit of the code.
5. Repeat Step 1~4 to fi nd the codes of other devices. LED does not light up = 0.
MY DEVICE MY CODE
________ __ __ __
________ __ __ __
________ __ __ __
________ __ __ __
3 Volume Control Via TV
It is possible to perform the volume control of VCR, Satellite, Cable TV, DVD, CD etc. via the TV set.
Activate Volume Control Via TV
1. To activate this application, enter the code 901 as described in „Direct code setup“ for the required device
such as VCR, SAT, Cable DVD, CD etc. The Volume Control via TV function for each device should be activated
separately.
2. As soon as this application is active for one of the devices, volume can be controlled by TV device volume
keys, whether the device itself has volume control or not.
3. To adjust the volume, press the desired TV device button of the TV set for volume control, then press the
button of the device in use, e.g. TDT, SAT, DVD, CD, AUX, VCR etc.
Deactivate Volume Control Via TV
To deactivate this application enter the code 902 as described in “Direct code setup” for the required
device such as VCR, SAT, Cable, DVD, CD etc. The Volume Control via TV function for each device should be
deactivated separately.
When this function is no longer active and the device has its own volume control, volume can be adjusted
with the device itself.
This function is automatically active, i.e. volume control is automatically done via TV, after resetting, the
volume control is automatically done via TV, for all devices without volume control. (To adjust the volume,
press the TV DEVICE button of the TV set for volume control, then press the button of the device in use, e.g.
TDT, SAT, DVD, CD, AUX, VCR).
To Next Page
Loading...